 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Brief SII5734 SteelVineTM Storage Processor USB 2.0 and eSATA to SATA Storage Processor * External storage enclosures Applications The SII5734 is a low-cost, single chip solution for single-drive external enclosures and external backup drives. This SteelVine Storage Processor has two 3 Gbps eSATA Gen2m device ports, one 3 Gbps eSATA host port and one USB 2.0 host port. The SII5734 features proprietary eSATA-based capacity expansion, which allows users to easily grow the capacity of an existing SteelVine enabled device by adding additional drives. The new drives will appear to the host system as additional space in the existing SteelVine volume. * Backup storage devices Key Features * USB 2.0 and eSATA host ports * eSATA capacity expansion The SII5734 SteelVine Storage Processor allows manufacturers to build a range of internal and external single-drive storage solutions that support both USB and eSATA Gen2m, the fastest interface for consumer storage. Other features of the SII5734 include drive locking, single-button backup and support for advanced RAID modes. Extensive software developer kits are available from Silicon Image to support development and simplify product differentiation. The SII5734 also features drive locking, which helps protect users' data by allowing them to password lock directly attached and cascaded drives. If a locked drive is detached from its assigned computer or cascade, the data on the drive will be inaccessible until it is reconnected and unlocked with the user supplied password. Single-button backup through third-party applications is also supported. * Drive locking * Single-button backup * RAID Modes: BIG (Concatenation) and JBOD SII5734 System Diagram SII5734 eSATA-Based Capacity Expansion With eSATA-based Capacity Expansion, the capacity of a SII5734 enabled external enclosure can easily be expanded by adding additional SteelVine Features Serial ATA Host Interface Features Electrical Specifications Serial ATA Gen2m compliance eSATA and 2-meter cable support 3 Gbps (auto-negotiates to 1.5 Gbps) Compatible with PM aware and non-PM aware hosts * Allows multiple drives to be accessed by nonPM aware drive hosts * Supports NCQ USB Host Interface Features * * * * * GPIO pins: 9 GPI, 6 GPO * 3.3V IO supply, 1.8V core supply * 1.02 watts (typical) Environmental * Operating temperature: 0C to 70C * Operating relative humidity: 5% to 80% * Non-operating relative humidity: 5% to 95% Physical Specifications enabled devices in a cascaded topology. When in BIG mode, these additional devices will dynamically appear to the host system as increased storage capacity in the existing SteelVine volume. * * * * * Complies with USB 2.0 specification 480 Mb/s (can auto-negotiate to 12 Mb/s) Compatible with OHCI / UHCI / EHCI hosts Supports up to four LUNs Supports Mass Storage Class * 88-pin QFN * 10mm x 10mm Additional SteelVine features Device Interface Features * * * * * * * Serial ATA Gen2m compliance eSATA and 2-meter cable support 3 Gbps (auto-negotiates to 1.5 Gbps) Independent 8 KB FIFO / Port Power management capabilities Supports hot plug Supports ATAPI & asynchronous notification * * * * * * * No driver, BIOS or software required User API interface through I2C No drive reformatting on RAID change Email Notification Optional XML API Optional SteelVine Manager GUI Mandatory SMART commands available Capacity Expansion Diagram Block Diagram Silicon Image, Inc. 1060 E. Arques Avenue Sunnyvale, CA 94085 T 408.616.4000 F 408.830.9530 www.siliconimage.com (c) 2006 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SteelVine, the SteelVine logo, SiI and SII5734 are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. Other trademarks are property of their respective holders. Product specifications are subject to change without notice. Part Number: SII5734 SiI PB-61 rev1 8/06 |
Price & Availability of SII5734
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |